COPY ONLY LC-E106
2-Part Paste Adhesive

Description

123
LC-E106 is a two part epoxy specifically designed for bonding various substrates, e.g., metallic, composite, etc. into finished shapes or structures. LC-E106 can be cured at room temperature or elevated temperatures for an accelerated handling strength.

Advantages

The mixing and handling characteristics make LC-E106 an asset on the shop floor. LC-E106 can be easily sanded after full cure along with accelerated curing potential.

Physical Properties & Mix Ratio

Density: 1.16 G/cm3 per ASTM D792
Part A: Black paste
Part B: Amber paste
Combined mixture: Black paste
2:1 Mix Ratio by weight

Available Packaging

1 gallon kit (12.1 lbs) (LC-E106/1)
5 gallon kit (58 lbs.) (LC-E106/5)
Other packaging available upon request

Pot/Shelf Life

Pot Life at Room Temperature: 70 F (21 C): 20 Minutes (500 grams mass)
Shelf Life @ Room Temperature: 70 F (21 C): 12 Months

Cure Cycle

Handling Strength: 4 hours at Room temperature (70 F) (21 C)
Accelerated Handling Strength: 60 minutes at 150 F (65 C)
Full Strength/Cure: 7 Days at Room temperature (70 F) (21 C)


Mechanical Properties

Property

Tested per Specification

-67°F

70°F

160°F
Hardness (Shore D)
ASTM D2240
N/A
80
N/A
Lap Shear (psi)
ASTM D1002-10
N/A
2200
N/A
Compression (psi)
ASTM D695
N/A
7150
N/A

Seller cannot anticipate all conditions under which seller’s products, or the products of other manufacturers in combination with seller’s products, may be used. Seller accepts no responsibility for results obtained by the application of seller’s products or the safety and suitability of seller’s products, either alone or in combination with other products. Users are advised to conduct their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, seller delivers the products without warranty of any nature, stated or implied, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of said products, whether used alone or in combination with other products. Purchaser waives any claim against seller for direct, indirect, consequential or exemplary damages against seller, including without limitation, damage which may incur as a result of purchaser’s use or misuse of the product or the product’s failure to conform to any particular specification.