Description
LC-E106 is a two part epoxy specifically designed for bonding various substrates, e.g., metallic, composite, etc. into finished shapes or structures. LC-E106 can be cured at room temperature or elevated temperatures for an accelerated handling strength.
Advantages
The mixing and handling characteristics make LC-E106 an asset on the shop floor. LC-E106 can be easily sanded after full cure or with accelerated curing.
Physical Properties & Mix Ratio
Density: 1.16 G/cm3 per ASTM D792
Part A: Black paste
Part B: Amber paste
Combined mixture: Black paste
Mix Ratio by weight: 2:1
Available Packaging
1 gallon kit (12.1 lbs.) (LC-E106/1)
5 gallon kit (58 lbs.) (LC-E106/5)
Other packaging available upon request
Pot/Shelf Life
Pot Life at Room Temperature: 70 F (21 C): 20 Minutes (500 grams mass)
Shelf Life @ Room Temperature: 70 F (21 C): 12 Months
| CAUTION: WHEN MIXING QUANTITIES IN EXCESS OF 500 GRAMS, USE CAUTION AS LARGER MIX QUANTITIES AN/OR EXCESSIVE MIX TIME CAN CAUSE AN INCREASED EXOTHERMIC (IE. VERY HOT) REACTION. THE USER IS ENCOURAGED TO DEVELOP STANDARD MIX PRACTICES. |
Cure Cycle Recommendations
Handling Strength: 4 hours at Room temperature (70 F) (21 C)
Accelerated Handling Strength: 120 minutes at 150 F (65 C)
Full Strength/Cure: 7 Days at Room temperature (70 F) (21 C)
|
Mechanical Properties |
||||
|
Property |
Tested per Specification |
-67°F |
70°F |
160°F |
|
Hardness (Shore D)
|
ASTM D2240
|
N/A
|
80
|
N/A
|
|
Lap Shear (psi)
|
ASTM D1002-10
|
N/A
|
2220
|
N/A
|
|
Compression (psi)
|
ASTM D695
|
N/A
|
7150
|
N/A
|
Seller cannot anticipate all conditions under which seller’s products, or the products of other manufacturers in combination with seller’s products, may be used. Seller accepts no responsibility for results obtained by the application of seller’s products or the safety and suitability of seller’s products, either alone or in combination with other products. Users are advised to conduct their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, seller delivers the products without warranty of any nature, stated or implied, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of said products, whether used alone or in combination with other products. Purchaser waives any claim against seller for direct, indirect, consequential or exemplary damages against seller, including without limitation, damage which may incur as a result of purchaser’s use or misuse of the product or the product’s failure to conform to any particular specification.