LC-E111
2-Part Epoxy Casting / Laminating Resin

Description

LC-E111 is a two part epoxy system designed for optically clear finished parts. LC-E111 is ideal for thicker castings or can be used as a wet layup system, both of which are free of surface “blush”.

Advantages

LC-E111 provides an extended amount of pot life once part A and B have been blended. The low viscosity of the combined material also allows for easy wet out on most substrates. This system is a clear, tough Impact-resistant material that can be used in unsupported castings or combined with various cosmetic materials to enhance the internal substrate.

Physical Properties & Mix Ratio

Part A: Clear liquid
Part B: Clear liquid
Combined mixture: Clear liquid
Mix Ratio by weight 100:32


Available Packaging

1 gallon kit (11.6 lbs.) (LC-E111/1)
5 gallon kit (58 lbs.) (LC-E111/5)
55 gallon kit (693 lbs.) (LC-E111/55)
Other packaging available upon request

Pot/Shelf Life

Pot Life at Room Temperature: 70°F (21°C): 240 Minutes (500 grams mass)
Shelf Life @ Room Temperature: 70°F (21°C): 12 Months

CAUTION: WHEN MIXING QUANTITIES IN EXCESS OF 500 GRAMS, USE CAUTION AS LARGER MIX QUANTITIES AN/OR EXCESSIVE MIX TIME CAN CAUSE AN INCREASED EXOTHERMIC (IE. VERY HOT) REACTION. THE USER IS ENCOURAGED TO DEVELOP STANDARD MIX PRACTICES.

Cure Cycle Recommendations

Handling Strength: 24 hours at Room temperature (70°F) (21°C)
Accelerated Handling Strength: 180 minutes at 120°F (49°C)
Full Strength/Cure: 7 Days at Room temperature (70°F) (21°C)

Seller cannot anticipate all conditions under which seller’s products, or the products of other manufacturers in combination with seller’s products, may be used. Seller accepts no responsibility for results obtained by the application of seller’s products or the safety and suitability of seller’s products, either alone or in combination with other products. Users are advised to conduct their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, seller delivers the products without warranty of any nature, stated or implied, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of said products, whether used alone or in combination with other products. Purchaser waives any claim against seller for direct, indirect, consequential or exemplary damages against seller, including without limitation, damage which may incur as a result of purchaser’s use or misuse of the product or the product’s failure to conform to any particular specification.