LC-E114 is a two part epoxy laminating resin designed for wet layup applications which cures at room temperature.
The mixing and handling of LC-E114 are easily adaptive to all shop floor personnel. Complete wet out of various fabrics will be obtained with the reduced viscosity of the A and B combined mixture.
Physical Properties & Mix Ratio
Density: 1.16 g/cm3 per ASTM D792
Part A: Amber
Part B: Amber
Combined mixture: Dark Amber liquid
Mix Ratio by weight 5:1
1 gallon kit (9.6 lbs.) (LC-E114/1)
5 gallon kit (48 lbs.) (LC-E114/5)
Other packaging available upon request
Pot Life at Room Temperature: 70 F (21 C): 25 Minutes (300 grams mass)
Shelf Life at Room Temperature: 6 Months
|CAUTION: WHEN MIXING QUANTITIES IN EXCESS OF 300 GRAMS, USE CAUTION AS LARGER MIX QUANTITIES AN/OR EXCESSIVE MIX TIME CAN CAUSE AN INCREASED EXOTHERMIC (IE. VERY HOT) REACTION. THE USER IS ENCOURAGED TO DEVELOP STANDARD MIX PRACTICES.|
Cure Cycle Recommendations
Handling Strength: 24 hours at Room temperature (70 F) (21 C)
Accelerated Handling Strength: 120 minutes at 150 F (65 C)
Full Strength/Cure: 7 days at Room temperature (70 F) (21 C)
Seller cannot anticipate all conditions under which seller’s products, or the products of other manufacturers in combination with seller’s products, may be used. Seller accepts no responsibility for results obtained by the application of seller’s products or the safety and suitability of seller’s products, either alone or in combination with other products. Users are advised to conduct their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, seller delivers the products without warranty of any nature, stated or implied, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of said products, whether used alone or in combination with other products. Purchaser waives any claim against seller for direct, indirect, consequential or exemplary damages against seller, including without limitation, damage which may incur as a result of purchaser’s use or misuse of the product or the product’s failure to conform to any particular specification.