Description
LC-E222 is a 250⁰F (121⁰C) toughened, high peel flame retardant epoxy film adhesive specifically designed for bonding structural materials, metals, composites, etc. to various core materials while maintaining excellent peel strength.
Advantages
LC-E222 demonstrates excellent adhesion and toughness throughout various cure cycles using both press and vacuum bag curing. The chemistry surrounding LC-E222 allows for higher elongation thus increased compatibility with numerous composite materials. LC-E222 can also be supplied both supported and unsupported in multiple weight and thicknesses.
Physical Properties
Density: 1.2 G/cm3 per ASTM D792
Gel Time @ 275⁰F (135⁰C): 4 - 6 minutes
Glass Transition Temperature (Tg): 218°F (103°C)
Color: Cream
Tack: Medium
Shelf Life / Out Life / Storage
Shelf Life: 6 months from Certification Date
Out Life: 14 days @ 70⁰F (21⁰C)
Storage Temp: 6 months @ 40⁰F or below
Processing/Cure Cycle Recommendations
LC-E222 can be processed at temperatures from 235⁰F. (113⁰C.) for 90 minutes to 290⁰F. (143⁰C.) for 40 minutes, using low, medium or high pressure. A 250⁰F (121⁰C) cure for 60 minutes is optimal in most cases using press, vacuum bag or autoclave processing with 25 psi pressure.
Mechanical Properties |
||||
Property |
Tested per Specification |
-67°F |
R.T. (75°F) |
180°F |
Tensile Shear (psi)
|
MMM-A-132
|
5220
|
4850
|
3250
|
Tensile Shear (psi} After Exposure
30 days @ 120° F, 95% RH |
MMM-A-132
|
N/A
|
4650
|
N/A
|
Tensile Shear (psi} After Exposure
7 days in Hydraulic Fluid |
MMM-A-132
|
N/A
|
4800
|
N/A
|
Tensile Shear (psi} After Exposure
7 days in JP4 Fuel |
MMM-A-132
|
N/A
|
5125
|
N/A
|
Creep Rupture (psi)
|
MMM-A-132
|
N/A
|
Pass
|
Pass
|
T-Peel Lbs/inch width
|
MMM-A-132
|
N/A
|
21
|
N/A
|
*Tests performed using LC-E222M (supported) .060 psf, press cured @ at 250⁰F, 25 psi pressure.
Seller cannot anticipate all conditions under which seller’s products, or the products of other manufacturers in combination with seller’s products, may be used. Seller accepts no responsibility for results obtained by the application of seller’s products or the safety and suitability of seller’s products, either alone or in combination with other products. Users are advised to conduct their own tests to determine the safety and suitability of each such product or product combination for their own purposes. Unless otherwise agreed in writing, seller delivers the products without warranty of any nature, stated or implied, and buyers and users assume all responsibility and liability for loss or damage arising from the handling and use of said products, whether used alone or in combination with other products. Purchaser waives any claim against seller for direct, indirect, consequential or exemplary damages against seller, including without limitation, damage which may incur as a result of purchaser’s use or misuse of the product or the product’s failure to conform to any particular specification.